Brownells 45° Muzzle Cylinder Chamfering Cutter Steel Pilot 45° Cutter Steel Pilot Fits 7mm Muzzle

Brownells 45° Muzzle Cylinder Chamfering Cutter Steel Pilot 45° Cutter Steel Pilot Fits 50 Bmg Bp Muzzle

45 chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45 Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a " diameter, 45 cutter. Mfg: Brownells SPECS: Chamfer Cutter X"X Hardened steel. 3" (8.25cm) long (except .165" cutter, 2-3/8" (6cm) long). " (12.7mm) or 5/8" (15.8mm) diameter as required. Handle X"X Aluminum. 3" (8.9cm) long. 3 oz. (85 g). Pilot - Hardened steel. 1" (3.2cm) long. .45 ACP Pilots - .45 ACP-1 fits S&W model 25

Brownells Rifle Muzzle Brass Pilots Fits 7mm Muzzle

Hardened brass pilots won't scar or damage delicate rifling. A very handy tool to take along to the range or keep in your tool box, "just in case". Mfg: Brownells SPECS: Pilot - brass, 1¼" (3cm) long.

Brownells Steel One Caliber Sets Steel One Caliber Set Fits 22 Rf Muzzle 213

Set includes: one, 90 facing cutter to square a muzzle after shortening, or repair damage; one, 45 chamfering cutter to break the edges of the rifling for a clean bullet exit or chamfer a revolver cylinder mouth for quick reloads; plus one handle that fits either cutter and one steel bore pilot. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. Mfg: Brownells SPECS: Facing Cutter X"X Hardened steel. 3¼" (8.2cm) long (except .165" cutter, 2-3/8" (6cm) long). 1" (2.5cm) or .750" (19mm) diameter as required. Chamfer Cutter X"X Hardened steel. 3¼" (8.25cm) long (except .165" cutter, 2-3/8" (6cm) long). ½" (12.7mm) or 5/8" (15.8m

Brownells 90° Muzzle Facing Cutters 750 90° Facing Cutter Only

Uses interchangeable, 1-1⁄4" long, slip-in muzzle pilots that keep its blades exactly perpendicular to the bore axis. Actually faces-off and squares-up barrel muzzles after shortening, prior to crowning. Ideal for removing dings or damage from flat faced (not rounded), rifle and handgun muzzles. Mfg: Brownells SPECS: Cutter - 3-1⁄4" (8.2cm) long (except .17 caliber cutter - 2-3⁄8" (6cm) long. Diameter - 1" (2.5cm) or .750" (19mm). Hardened steel cutter.

Brownells 18° Chamfer Cutter Fits 45 Caliber

Our "standard" cutter. The angle is right for jacketed bullets as well as round nose and semi-wadcutter lead bullets. It will remove most factory cuts without exceeding the maximum recommended throat diameter or creating a compound angle. Use the .38 cutter for 9mm through .41; use the.45 cutter for .44 through .45. Mfg: Brownells

Clymer Live Pilot Finish Reamers 7mm 088 Remington Live Pilot Finisher Hss

These reamers are manufactured by CLYMER Precision using the best M42 w/ Cobalt HSS available. (Cobalt steel is more resistant to heat and abrasion than many other high-speed steels, which dramatically increases tools life and durability) Manufacturer grade tooling Smooth/free cutting guaranteed Live pilot spindle threaded for 4-40 fillister head screw to easily attach industry standard bushings (no C clips required) Oil grooves standard in pilot spindle to allow for muzzle flush chambering applications Industry standard 7/16" shank with integral Weldon flat and 1/4-28 female threads Live piloted reamers allow for customer to int Mfg: Clymer

Brownells Shotgun Bead Facing Cutter 140 Diameter Fits 6 Standard Shank

No more tilted, sloppy looking, half square front sight beads. Faces-off the base of "Bradley"-style (Bev-L-Blok, Raybar, Sunspot, etc.) beads so they end up straight and square to the center of the rib or barrel when tightened. Six-bladed cutter with precisely drilled hollow center accepts bead shank. Turning the handle trims base of the bead at a true 90 angle that's absolutely square with the shank. Mfg: Brownells SPECS: Six blade cutter, high speed steel, 3½" (8.8cm) long, 1-1/8" (2.8cm) diameter handle.